Samsung TV WiFi Not Connecting

Samsung TV WiFi Not Connecting: 20 Proven Ways to Fix Wireless Connection Issues

If your Samsung TV WiFi Not Connecting issue is preventing you from streaming your favorite shows or using smart features, you’re not alone. Many Samsung Smart TV users experience wireless connection problems after a software update, router restart, power outage, or network setting change.

Fortunately, most WiFi connection issues can be fixed without replacing your TV or calling a technician. In many situations, the problem is caused by incorrect network settings, weak WiFi signals, router configuration issues, or outdated software.

This guide explains why your Samsung TV won’t connect to WiFi, the common symptoms to look for, and the most effective troubleshooting methods. Follow each solution in order until your TV reconnects successfully.

Why Is My Samsung TV Not Connecting to WiFi?

Several factors can prevent your Samsung Smart TV from connecting to your wireless network.

  • Weak WiFi Signal
  • Router Issues
  • Incorrect WiFi Password
  • Outdated TV Software
  • Corrupted Network Settings
  • DNS Configuration Problems
  • Internet Service Provider (ISP) Outage
  • Samsung Server Issues
  • Hardware Failure

Identifying the root cause helps you apply the correct fix instead of trying random troubleshooting steps.

Common Symptoms

You may notice one or more of the following problems:

  • Samsung TV won’t connect to WiFi
  • Unable to find available wireless networks
  • Connected without internet
  • WiFi keeps disconnecting
  • Network setup failed
  • Apps won’t load
  • Netflix or YouTube not working
  • Streaming constantly buffers
  • Network error messages appear

Quick Fixes Table

Problem Recommended Solution
TV can’t find WiFi Restart your router and TV
Incorrect Password Enter the correct WiFi password again
Connected Without Internet Restart modem and router
Frequent Disconnections Move router closer to TV
Slow Streaming Switch between 2.4GHz and 5GHz WiFi
Network Error Reset network settings
Apps Not Working Update Samsung TV software
No Networks Found Check router wireless settings

Preparation Before Troubleshooting

Before performing advanced troubleshooting, complete these basic checks:

  • Confirm your internet works on another device.
  • Restart your Samsung Smart TV.
  • Restart your WiFi Router.
  • Keep your WiFi password ready.
  • Move the TV closer to the router if possible.
  • Disconnect unnecessary devices from your network.
  • Check whether your Internet Service Provider is experiencing an outage.

These simple preparation steps often solve temporary connection problems before more advanced troubleshooting is needed.

Method 1: Restart Your Samsung TV

A temporary software glitch is one of the most common reasons a Samsung TV WiFi Not Connecting issue occurs. Restarting your TV clears temporary memory, refreshes background services, and often restores the wireless connection without changing any settings.

Why It Works

Like a smartphone or computer, your Samsung Smart TV continuously runs multiple applications and background processes. If one of these processes freezes or crashes, the WiFi adapter may stop working correctly. A restart reloads the operating system and network services.

Step-by-Step Instructions

  1. Turn off your Samsung TV using the remote.
  2. Unplug the TV from the power outlet.
  3. Wait for 60 seconds.
  4. While unplugged, press and hold the TV’s physical Power Button for about 15 seconds.
  5. Reconnect the power cable.
  6. Turn the TV back on.
  7. Go to Settings → General → Network → Open Network Settings.
  8. Try connecting to your WiFi again.

Expected Result

The TV should reconnect to your wireless network successfully. If the connection works, the issue was likely caused by a temporary software bug.

When to Try the Next Method

If your Samsung TV still cannot detect or connect to your WiFi network, continue with Method 2.

Method 2: Restart Your WiFi Router

Sometimes the problem isn’t your TV at all. Your wireless router may have stopped assigning IP addresses correctly or may be experiencing temporary connectivity issues.

Why It Works

Restarting the router refreshes its internal memory, clears network congestion, renews internet communication with your ISP, and resolves many common wireless issues.

Step-by-Step Instructions

  1. Turn off your WiFi router.
  2. Unplug the router’s power cable.
  3. Wait for at least 2 minutes.
  4. Reconnect the power cable.
  5. Allow the router to fully restart.
  6. Wait until the Internet and WiFi lights become stable.
  7. Reconnect your Samsung TV to the network.

Expected Result

Your Samsung TV should detect the WiFi network and establish a stable internet connection.

When to Try the Next Method

If other devices also have internet issues, contact your Internet Service Provider. If only the TV is affected, move to Method 3.

Method 3: Forget the WiFi Network and Reconnect

Saved network information can become outdated or corrupted after changing your WiFi password, replacing your router, or updating your TV software. Removing the saved network and reconnecting often resolves authentication problems.

Why It Works

Deleting the stored WiFi profile forces your TV to create a completely new wireless connection using the latest security settings.

Step-by-Step Instructions

  1. Open Settings.
  2. Select General.
  3. Choose Network.
  4. Select Open Network Settings.
  5. Choose your WiFi network.
  6. Select Forget Network (if available).
  7. Scan for available WiFi networks again.
  8. Select your network.
  9. Enter the correct WiFi password carefully.
  10. Complete the connection process.

Expected Result

Your TV should reconnect successfully and receive a new IP address from your router.

When to Try the Next Method

If the TV displays an authentication error or still won’t connect, continue with Method 4.

Method 4: Verify Your WiFi Password

One of the easiest issues to overlook is entering an incorrect wireless password. Even a small typing mistake, incorrect capitalization, or missing character can prevent your Samsung TV from joining the network.

Why It Works

Modern WiFi networks use strong security standards such as WPA2 and WPA3. These security protocols require an exact password match before allowing a device to connect.

Step-by-Step Instructions

  1. Double-check your WiFi password.
  2. Pay attention to uppercase and lowercase letters.
  3. Verify numbers and special characters.
  4. If needed, view the password in your router settings.
  5. Reconnect your Samsung TV using the correct credentials.

Expected Result

After entering the correct password, your Samsung TV should connect to the wireless network within a few seconds.

When to Try the Next Method

If the password is correct but the connection still fails, proceed to Method 5.

Method 5: Move Your Router Closer to the TV

A weak or unstable wireless signal can cause your Samsung TV to disconnect frequently or fail to connect altogether. Physical obstacles such as walls, furniture, mirrors, and large appliances can reduce WiFi signal strength.

Why It Works

Reducing the distance between your router and TV improves signal strength, minimizes interference, and creates a more reliable wireless connection.

Step-by-Step Instructions

  1. Move the router closer to your TV if possible.
  2. Place the router in an open, elevated location.
  3. Avoid placing the router inside cabinets.
  4. Keep it away from microwave ovens and cordless phones.
  5. Reconnect the TV to WiFi.
  6. Run a streaming app to verify connection stability.

Expected Result

Your TV should maintain a stronger and more stable wireless connection with fewer interruptions while streaming movies, live TV, or online content.

When to Try the Next Method

If signal strength is good but the connection problem continues, move on to Method 6, where you’ll check for available Samsung TV software updates.

Method 6: Update Your Samsung TV Software

An outdated firmware version can cause network bugs, compatibility issues with newer routers, and WiFi connection failures. Samsung regularly releases software updates that improve stability, fix known bugs, and enhance wireless performance.

Why It Works

Software updates often include fixes for network connectivity, WiFi performance, and security improvements. Installing the latest firmware ensures your TV works properly with modern routers and internet standards.

Step-by-Step Instructions

  1. Press the Home button on your remote.
  2. Go to Settings → Support → Software Update.
  3. Select Update Now.
  4. If an update is available, download and install it.
  5. Wait until the installation completes.
  6. The TV will restart automatically.
  7. Reconnect to your WiFi network.

Expected Result

Your Samsung TV should connect more reliably after installing the latest firmware update.

When to Try the Next Method

If your TV already has the latest software or the problem continues, proceed to Method 7.

Method 7: Reset Network Settings

Incorrect or corrupted network settings can prevent your TV from connecting to WiFi. Resetting these settings removes all saved wireless information and restores the default network configuration.

Why It Works

Over time, stored IP addresses, DNS settings, and network profiles may become corrupted. A network reset clears these errors and allows the TV to establish a fresh connection.

Step-by-Step Instructions

  1. Open Settings.
  2. Select General.
  3. Go to Network.
  4. Select Reset Network (available on supported models).
  5. Confirm the reset.
  6. Restart the TV.
  7. Reconnect to your WiFi network.

Expected Result

The TV creates a new wireless connection using default network settings.

When to Try the Next Method

If resetting the network doesn’t help, continue with Method 8.

Method 8: Reset Smart Hub

If only streaming apps are having internet issues while your TV connects to WiFi, the problem may be related to the Smart Hub rather than the wireless connection itself.

Why It Works

Resetting Smart Hub removes corrupted app data, refreshes Samsung services, and restores the default Smart Hub configuration.

Step-by-Step Instructions

  1. Open Settings.
  2. Select Support.
  3. Choose Device Care or Self Diagnosis (varies by model).
  4. Select Reset Smart Hub.
  5. Enter your TV PIN if requested.
  6. Allow the reset to complete.
  7. Sign back into your streaming apps.

Expected Result

Apps such as Netflix, YouTube, Disney+, and Prime Video should work normally if Smart Hub was causing the issue.

When to Try the Next Method

If your TV still reports no internet connection, move on to Method 9.

Method 9: Change DNS Settings

Sometimes your TV connects to WiFi but cannot access the internet because of DNS server problems. Switching to a public DNS service can resolve this issue.

Why It Works

A DNS server translates website names into IP addresses. If your ISP’s DNS server is slow or unavailable, apps may fail to connect even though WiFi is working.

Step-by-Step Instructions

  1. Open Settings → General → Network → Network Status.
  2. Select IP Settings.
  3. Choose DNS Settings.
  4. Select Enter Manually.
  5. Enter 8.8.8.8 (Google Public DNS).
  6. Save the changes.
  7. Restart your TV.

Expected Result

The TV should establish internet access if the original DNS server was causing the problem.

When to Try the Next Method

If internet access is still unavailable, continue with Method 10.

Method 10: Disable VPN or Proxy Settings

If your network uses a VPN or proxy server, it may interfere with Samsung TV services or block internet connectivity. While Samsung TVs don’t include built-in VPN settings, VPN-enabled routers can affect the connection.

Why It Works

Some VPN servers restrict streaming services, create routing conflicts, or introduce network delays. Disabling the VPN temporarily helps determine whether it’s causing the WiFi issue.

Step-by-Step Instructions

  1. Log in to your router’s admin page.
  2. Check whether a VPN service is enabled.
  3. Temporarily disable the VPN or proxy.
  4. Restart the router.
  5. Restart your Samsung TV.
  6. Reconnect to your WiFi network.
  7. Test your streaming apps.

Expected Result

If the VPN was blocking the connection, your Samsung TV should now access the internet normally and streaming services should load without errors.

When to Try the Next Method

If disabling the VPN doesn’t solve the problem, continue with Method 11: Switch Between 2.4GHz and 5GHz WiFi Networks.

Method 11: Switch Between 2.4GHz and 5GHz WiFi Bands

Many modern routers broadcast both 2.4GHz and 5GHz wireless networks. While the 5GHz band offers faster speeds, it has a shorter range. The 2.4GHz band provides better coverage but may experience more interference. If your Samsung TV struggles to connect to one band, switching to the other may solve the problem.

Why It Works

Different Samsung TV models perform better on different wireless frequencies. If one WiFi band is congested or has a weak signal, using the alternate band can improve connection stability.

Step-by-Step Instructions

  1. Open your router settings.
  2. Confirm that both 2.4GHz and 5GHz networks are enabled.
  3. On your Samsung TV, open Settings → General → Network → Open Network Settings.
  4. Select the alternate WiFi network.
  5. Enter the WiFi password.
  6. Wait for the connection to complete.
  7. Test your internet connection by opening a streaming app.

Expected Result

Your TV should establish a more reliable wireless connection with improved speed and fewer interruptions.

When to Try the Next Method

If changing the WiFi band doesn’t help, continue with Method 12.

Method 12: Perform a Factory Reset

If none of the previous solutions work, restoring your Samsung TV to its factory default settings can eliminate deep software issues that prevent WiFi connectivity.

Why It Works

A factory reset removes corrupted settings, user configurations, and software conflicts, giving the TV a fresh start.

Step-by-Step Instructions

  1. Open Settings.
  2. Select General & Privacy (or General depending on your model).
  3. Choose Reset.
  4. Enter your TV PIN (default is usually 0000 unless changed).
  5. Confirm the reset.
  6. Wait for the TV to restart.
  7. Complete the initial setup.
  8. Reconnect to your WiFi network.

Expected Result

The TV should operate with default settings and connect normally if a software configuration issue caused the problem.

When to Try the Next Method

If the WiFi problem remains after a factory reset, continue to Method 13.

Method 13: Check Your Router Settings

Certain router configurations can prevent your Samsung TV from connecting, even though other devices work normally.

Why It Works

Settings such as MAC address filtering, unsupported security modes, hidden SSIDs, or device limits may block new connections.

Step-by-Step Instructions

  1. Log in to your router’s administration page.
  2. Verify that DHCP is enabled.
  3. Ensure your WiFi security is set to WPA2-PSK or another compatible mode.
  4. Disable MAC address filtering temporarily.
  5. Make sure your WiFi network name (SSID) is visible.
  6. Save the settings.
  7. Restart the router.
  8. Reconnect your Samsung TV.

Expected Result

Your Samsung TV should successfully authenticate and receive an IP address from the router.

When to Try the Next Method

If the router settings are correct, move on to Method 14.

Method 14: Verify the Date and Time Settings

Incorrect date and time settings can interfere with secure internet connections and app authentication.

Why It Works

Streaming services and secure websites rely on accurate system time to validate security certificates. An incorrect clock may cause connection failures.

Step-by-Step Instructions

  1. Open Settings → General → System Manager → Time.
  2. Enable Automatic Date & Time.
  3. If necessary, set the correct time zone manually.
  4. Restart the TV.
  5. Reconnect to WiFi.

Expected Result

Secure network services should function properly once the correct date and time are configured.

When to Try the Next Method

If WiFi still isn’t working, proceed to Method 15.

Method 15: Perform a Complete Power Cycle

A complete power cycle clears residual electrical charge from your TV and networking hardware, helping resolve stubborn hardware communication problems.

Why It Works

Unlike a normal restart, a power cycle fully resets internal electronic components, including the wireless adapter.

Step-by-Step Instructions

  1. Turn off your Samsung TV.
  2. Unplug the TV from the power outlet.
  3. Unplug your modem and router.
  4. Wait for 2 to 3 minutes.
  5. Reconnect the modem first.
  6. Wait until all internet lights stabilize.
  7. Reconnect the router.
  8. Finally, plug in and turn on your TV.
  9. Reconnect to your WiFi network.

Expected Result

The TV should reconnect to your wireless network with refreshed hardware communication.

When to Try the Next Method

If your Samsung TV still cannot connect to WiFi, continue with Method 16: Check for an Internet Service Provider (ISP) Outage.

Method 16: Check for an Internet Service Provider (ISP) Outage

Sometimes the problem is not with your Samsung Smart TV or your router. Your Internet Service Provider (ISP) may be experiencing a temporary outage, maintenance, or network congestion that prevents your TV from accessing the internet.

Why It Works

Even if your Samsung TV successfully connects to WiFi, it still requires an active internet connection from your ISP. If your provider’s service is interrupted, your TV may display messages such as “Connected Without Internet” or fail to load streaming apps.

Step-by-Step Instructions

  1. Check whether your smartphone or laptop can access the internet using the same WiFi network.
  2. Open a web browser and visit several websites.
  3. If multiple devices have no internet access, restart your modem.
  4. Wait five minutes for the modem to reconnect.
  5. If the issue continues, check your ISP’s outage page or mobile app.
  6. Contact your ISP to confirm whether there is a service interruption in your area.

Expected Result

If an ISP outage caused the problem, your Samsung TV should reconnect automatically once internet service is restored.

When to Try the Next Method

If your internet works normally on other devices but your Samsung TV still won’t connect, continue to Method 17.

Method 17: Check Samsung Server Status

Samsung Smart TVs rely on several online services for software updates, Smart Hub features, account authentication, and app downloads. Occasionally, Samsung’s servers may experience temporary issues.

Why It Works

If Samsung servers are temporarily unavailable, certain smart features may stop working even though your internet connection is stable.

Step-by-Step Instructions

  1. Verify that your internet connection works on another device.
  2. Try opening multiple streaming apps on your TV.
  3. If only Samsung services are unavailable, wait for some time and try again later.
  4. Restart your TV after a few minutes.
  5. Check for software updates once services become available again.

Expected Result

Once Samsung’s online services are operating normally, Smart Hub, app downloads, and account services should function correctly.

When to Try the Next Method

If the problem is unrelated to Samsung services, continue with Method 18.

Method 18: Check for WiFi Hardware Problems

If none of the previous troubleshooting steps resolve the issue, your TV’s internal WiFi module or network hardware may be malfunctioning.

Why It Works

Like any electronic component, the wireless adapter inside a Samsung TV can fail due to age, power surges, overheating, or physical damage. A faulty WiFi module prevents the TV from detecting or maintaining wireless connections.

Signs of Hardware Failure

  • The TV never detects any WiFi networks.
  • WiFi disappears after every restart.
  • Network settings are unavailable.
  • Wireless connection fails immediately.
  • Ethernet works, but WiFi never connects.
  • The TV frequently freezes while scanning for networks.

Expected Result

If these symptoms are present, the issue may require professional diagnosis or hardware replacement.

When to Try the Next Method

If you suspect hardware failure, proceed to Method 19 before arranging repairs.

Method 19: Test Using a Wired Ethernet Connection

Connecting your Samsung TV directly to the router with an Ethernet cable helps determine whether the issue is limited to the wireless connection.

Why It Works

If the TV connects to the internet through Ethernet but not WiFi, the wireless adapter or wireless settings are likely causing the problem.

Step-by-Step Instructions

  1. Connect one end of an Ethernet cable to your router.
  2. Connect the other end to the Ethernet port on your Samsung TV.
  3. Restart the TV.
  4. Allow the network to connect automatically.
  5. Open YouTube or another streaming app.
  6. Check whether videos play normally.

Expected Result

A successful wired connection confirms that your internet service is working and narrows the problem to the TV’s wireless functionality.

When to Try the Next Method

If both wired and wireless connections fail, continue with the final troubleshooting step.

Method 20: Contact Samsung Support

If you have completed all previous troubleshooting methods and your Samsung TV still won’t connect to WiFi, it’s time to contact Samsung Support. A technician can check for hardware defects, firmware issues, or warranty-covered repairs.

Why It Works

Professional support teams have access to advanced diagnostic tools and repair procedures that are unavailable to most users.

Before Contacting Support

  • Write down your Samsung TV model number.
  • Record the software version.
  • Note any error messages displayed.
  • List the troubleshooting steps you’ve already completed.
  • Confirm whether the issue affects both WiFi and Ethernet.

Expected Result

Samsung Support can determine whether your TV requires a software repair, replacement WiFi module, or additional servicing.

Common Samsung TV WiFi Error Messages

Error Message Possible Cause Recommended Fix
Unable to Connect Weak WiFi signal Move the router closer and restart both devices.
Connected Without Internet ISP or modem issue Restart the modem and verify internet service.
Network Setup Failed Incorrect settings Reset the TV’s network settings.
IP Address Failed DHCP problem Restart the router or assign a new IP address.
Authentication Failed Incorrect WiFi password Re-enter the wireless password carefully.
No Wireless Networks Found Router or WiFi module issue Restart the router and check for hardware problems.

Troubleshooting Flow

  1. Restart your Samsung TV.
  2. Restart your router and modem.
  3. Reconnect to the WiFi network.
  4. Update your TV software.
  5. Reset network settings.
  6. Change DNS settings.
  7. Switch between 2.4GHz and 5GHz.
  8. Check router settings.
  9. Test using an Ethernet cable.
  10. Contact Samsung Support if the issue continues.

“`html

Signs Your Samsung TV May Have a Hardware Problem

If you’ve tried every troubleshooting method and your Samsung TV WiFi not connecting issue remains, the problem may be related to the TV’s internal hardware. While software issues are much more common, hardware failures can occur over time due to age, overheating, or electrical damage.

The most common hardware component responsible for wireless connectivity is the WiFi module. If this component fails, your TV may not detect nearby wireless networks or may disconnect frequently.

Common Signs of Hardware Failure

  • No WiFi networks appear even after restarting the TV.
  • The TV constantly displays “Network Error”.
  • The wireless connection drops within a few minutes.
  • The TV freezes while searching for WiFi networks.
  • Ethernet works perfectly, but WiFi never connects.
  • The WiFi option disappears from the Network menu.
  • The problem continues after a factory reset.

If you notice several of these symptoms, professional repair may be required.

When Should You Contact Samsung Support?

Most Samsung TV wireless problems can be solved at home. However, you should contact Samsung Support if basic troubleshooting doesn’t restore the connection.

Contact Samsung Support If:

  • Your TV is still under warranty.
  • The WiFi module appears defective.
  • Your TV cannot detect any wireless networks.
  • Factory reset doesn’t solve the problem.
  • The TV repeatedly restarts during network setup.
  • You notice unusual hardware behavior or overheating.

Before contacting support, keep the following information ready:

  • Samsung TV model number
  • Current software version
  • Router model
  • Internet provider name
  • Photos of any error messages

Expert Tips to Prevent Samsung TV WiFi Problems

Following these best practices can help maintain a stable wireless connection and reduce future network issues.

  • Keep your Samsung TV software updated.
  • Restart your router once every few weeks.
  • Place the router in an open, elevated location.
  • Avoid placing the router near microwaves or cordless phones.
  • Use the 5GHz band for faster speeds when the TV is close to the router.
  • Use the 2.4GHz band for better range through walls.
  • Avoid connecting too many devices to the same WiFi network.
  • Enable automatic software updates whenever possible.
  • Use a quality router if you stream 4K or 8K content.
  • Restart your TV occasionally instead of leaving it running continuously.

Common Mistakes to Avoid

Many users accidentally make troubleshooting more difficult by skipping simple checks. Avoid these common mistakes:

  • Entering the wrong WiFi password.
  • Skipping a router restart.
  • Ignoring available firmware updates.
  • Performing a factory reset before trying easier solutions.
  • Keeping the router inside a cabinet.
  • Using outdated router firmware.
  • Changing multiple settings at the same time.
  • Assuming the TV is faulty without testing another device.

Benefits of Fixing Samsung TV WiFi Issues

  • Reliable video streaming without buffering.
  • Faster app loading times.
  • Stable Smart Hub performance.
  • Improved software update reliability.
  • Better online gaming experience.
  • Smoother screen mirroring.
  • Consistent access to streaming services.
  • Reduced connection interruptions.

Pros and Cons of Using WiFi on Samsung Smart TVs

Pros Cons
No Ethernet cable required. Signal strength depends on router placement.
Easy to set up. Wireless interference can reduce speed.
Supports streaming throughout the home. May disconnect if the signal is weak.
Works with most modern routers. Slower than a wired Ethernet connection.
Convenient for wall-mounted TVs. Performance varies with network congestion.

Frequently Asked Questions (FAQs)

1. Why won’t my Samsung TV connect to WiFi?

The most common causes include incorrect WiFi passwords, weak signals, outdated software, router issues, or corrupted network settings.

2. Why does my Samsung TV keep disconnecting from WiFi?

Frequent disconnections are usually caused by weak signal strength, router interference, or outdated firmware.

3. How do I reconnect my Samsung TV to WiFi?

Go to Settings → General → Network → Open Network Settings, select your WiFi network, and enter the correct password.

4. Can a software update fix WiFi problems?

Yes. Samsung regularly releases firmware updates that improve network stability and fix connectivity bugs.

5. Should I use 2.4GHz or 5GHz?

Use 5GHz for higher speeds at shorter distances and 2.4GHz for better range through walls.

6. Why does my TV say “Connected Without Internet”?

This usually indicates an ISP outage, modem issue, or DNS problem.

7. Will resetting network settings delete my apps?

No. Resetting network settings only removes saved WiFi information.

8. Does a factory reset delete everything?

Yes. A factory reset removes your settings, installed apps, and personal preferences.

9. Can a bad router cause WiFi issues?

Yes. Older or overloaded routers may struggle to maintain a stable connection.

10. Is Ethernet better than WiFi?

Yes. A wired Ethernet connection is generally faster and more reliable than WiFi.

11. Why can’t my TV find my WiFi network?

Your router may be too far away, the WiFi signal may be hidden, or the TV’s WiFi module may have a problem.

12. How often should I restart my router?

Restarting your router once every few weeks can improve overall network performance.

13. Can too many connected devices affect my TV?

Yes. Network congestion can reduce available bandwidth and impact streaming quality.

14. What should I do if only my TV has internet problems?

Reset the TV’s network settings, update the software, and test with an Ethernet cable.

15. When should I replace my Samsung TV?

If the internal WiFi hardware has failed and repair costs are close to the price of a new TV, replacement may be the better long-term option.

Related TV & Network Troubleshooting Guides